| Article | Description | European standards | Other standards | REMARK |
| G01.01 | “GO”GAUGE FOR E14 CAPS ON FINISHED LAMPS | EN60061-3 | IEC60061-3 | 7006-27F-1 |
| G01.02 | “NOT GO” GAUGE FOR E14 CAPS ON FINISHED LAMPS | EN60061-3 | IEC60061-3 | 7006-28B-1 |
| G01.03 | GAUGE FOR FINISHED LAMPS FITTED WITH E14 CAPS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT | EN60061-3 | IEC60061-3 | 7006-55-2 |
| G01.04 | GAUGE FOR FINISHED LAMPS FITTED WITH E14 CAPS FOR TESTING CONTACT-MAKING | EN60061-3 | IEC60061-3 | 7006-54-2 |
| G01.05 | “GO”GAUGE FOR DIMENSION”S1” OF E14 CAPS ON FINISHED LAMPS | EN60061-3 | IEC60061-3 | 7006-27G-1 |
| G01.06 | “GO”GAUGES FOR SCREW THREADS OF LAMPHOLDERS E10,E14&E40 | EN60061-3 | IEC60061-3 | 7006-25-7 |
| G01.07 | “NOT GO”GAUGE FOR SCREW THREADS OF LAMPHOLDERS E10,EP10,EY10,E14,E27,E39&E40 | EN60061-3 | IEC60061-3 | 7006-26-4 |
| G01.08 | PLUG GAUGE FOR E14 LAMPHOLDER FOR TESTING CONTACT-MARKING | EN60061-3 | IEC60061-3 | 7006-30-2 |
| G01.09 | PLUG GAUGE FOR LAMPHOLDERS E14 WITH CANDLE SHAPED SHAFT FOR CANDLE LAMPS FOR TESTING CONACT-MARKING | EN60061-3 | IEC60061-3 | 7006-30A-1 |
| G01.10 | GAUGE FOR TESTING CONTACT-MARKING AND PROTECTION AGAINST ACCIDENTAL CONTACT DURING INSERTION OF LAMPS IN LAMPHOLDERS E14 | EN60061-3 | IEC60061-3 | 7006-31-4 |
| G01.11 | “GO” GAUGE FOR E27 CAPS ON FINISHED LAMPS | EN60061-3 | IEC60061-3 | 7006-27B-1 |
| G01.12 | "NOT GO" GAUGE FOR E27 CAPS ON FINISHED LAMPS | EN60061-3 | IEC60061-3 | 7006-28A-1 |
| G01.13 | GAUGE FOR FINISHED LAMPS FITTED WITH E27 CAPS FOR TESTING CONTACT-MAKING | EN60061-3 | IEC60061-3 | 7006-50-1 |
| G01.14 | GAUGE FOR CAPS ON FINISHED LAMPS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT DURING INSERTION E27 | EN60061-3 | IEC60061-3 | 7006-51A-2 |
| G01.15 | GAUGE FOR CAPS ON FINISHED LAMPS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT E27/51X39 | EN60061-3 | IEC60061-3 | 7006-51-2 |
| G01.16 | "GO" GAUGE FOR DIMENSION "S1" OF E27 CAPS ON FINISHED LAMPS | EN60061-3 | IEC60061-3 | 7006-27C-1 |
| G01.17 | "GO" GAUGE FOR LAMPHOLDERS E27 | EN60061-3 | IEC60061-3 | 7006-25A-2 |
| G01.18 | "NOT GO" GAUGES FOR SCREW THREADS OF LAMPHOLDERS E10, EP10, EY10, E14, E27, E39 & E40 | EN60061-3 | IEC60061-3 | 7006-26-4 |
| G01.19 | GAUGE FOR TESTING PROTECTION AGAINST BULB-NECK DAMAGE AND FOR TESTING CONTACT-MAKING IN LAMPHOLDERS E27 | EN60061-3 | IEC60061-3 | 7006-21-5 |
| G01.20 | GAUGE FOR TESTING CONTACT-MAKING AND PROTECTION AGAINST ACCIDENTAL CONTACT DURING INSERTION OF LAMPS IN LAMPHOLDERS E27 | EN60061-3 | IEC60061-3 | 7006-22A-4 |
| G01.21 | GAUGE FOR DETECTING SIDE-CONTACTS WITH CUTTING-EDGES IN LAMPHOLDERS E27 | EN60061-3 | IEC60061-3 | 7006-22B-1 |
| G01.22 | GAUGE I FOR CHECKING SIDE-CONTACT RESILIENCY IN LAMPHOLDERS E27 | EN60061-3 | IEC60061-3 | 7006-22C-1 |
| G01.23 | GAUGE II FOR CHECKING SIDE-CONTACT RESILIENCY IN LAMPHOLDERS E27 | EN60061-3 | IEC60061-3 | 7006-22D-1 |
| G01.24 | "GO" GAUGE FOR CAPS E26, E26/50X39, E26/51X39 & E26D | EN60061-3 | IEC60061-3 | 7006-27D-2 |
| G01.25 | GAUGE FOR CAPS ON FINISHED LAMPS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT E26D | EN60061-3 | IEC60061-3 | 7006-29A-2 |
| G01.26 | GAUGE FOR TESTING CONTACT-MAKING OF LAMPS FITTED WITH CAPS E26, E26/50X39, E26/51X39 & E26D (NON-SKIRTED) | EN60061-3 | IEC60061-3 | 7006-29-3 |
| G01.27 | GAUGE WITH REFERENCE DIAMETER OF 23 MM FOR CAPS E26D | EN60061-3 | IEC60061-3 | 7006-29B-2 |
| G01.28 | GAUGE WITH REFERENCE DIAMETER OF 13,2 MM FOR CAPS E26D | EN60061-3 | IEC60061-3 | 7006-29C-2 |
| G01.29 | GAUGE WITH REFERENCE DIAMETER OF 10,4 MM FOR E26D CAPS ON FINISHED LAMPS | EN60061-3 | IEC60061-3 | 7006-29D-1 |
| G01.30 | "NOT GO"GAUGE FOR CAPS E26, E26/50X39, E26/51X39& E26D | EN60061-3 | IEC60061-3 | 7006-29L-4 |
| G01.31 | GO" PLUG GAUGE FOR LAMPHOLDERS E26D | EN60061-3 | IEC60061-3 | 7006-29K-1 |
| G01.32 | NOT GO" GAUGE FOR LAMPHOLDERS E26 & E26D......... | EN60061-3 | IEC60061-3 | 7006-26A-2 |
| G01.33 | "GO" GAUGE FOR LAMPHOLDERS E26 | EN60061-3 | IEC60061-3 | 7006-25B-2 |
| G01.34 | GAUGE FOR TESTING CONTACT-MAKING IN LAMPHOLDERS E26D | EN60061-3 | IEC60061-3 | 7006-29G-3 |
| G01.35 | GAUGE FOR TESTING CONTACT-MAKING IN METAL-SHELL PAPER-LINED LAMPHOLDERS E26D | EN60061-3 | IEC60061-3 | 7006-29H-3 |
| G01.36 | GAUGE FOR TESTING UNACCEPTABLE CONTACT-MAKING IN LAMPHOLDERS E26D | EN60061-3 | IEC60061-3 | 7006-29M-1 |
| G01.37 | GAUGES FOR TESTING THE RELATIVE POSITIONS OF THE CONTACTS IN LAMPHOLDERS E26D | EN60061-3 | IEC60061-3 | 7006-29F-2 |
| G01.38 | PLUG GAUGE FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT IN E26D LAMPHOLDER | EN60061-3 | IEC60061-3 | 7006-29J-1 |
| G01.39 | GAUGE FOR TESTING CONTACT-MAKING IN LAMPHOLDERS E26 | EN60061-3 | IEC60061-3 | 7006-25J-1 |
| G01.40 | GAUGE FOR CHECKING THE RADIAL POSITION OF THE INTERMEDIATE CONTACT OF LAMPHOLDER E26D | EN60061-3 | IEC60061-3 | 7006-29E-1 |
| G01.41 | "GO" GAUGE FOR CAPS ON FINISHED LAMPS E40 | EN60061-3 | IEC60061-3 | 7006-27-7 |
| G01.42 | "NOT GO" GAUGE FOR CAPS ON FINISHED LAMPS E40 | EN60061-3 | IEC60061-3 | 7006-28D-1 |
| G01.43 | GAUGE FOR FINISHED LAMPS FITTED WITH E40 CAPS FOR TESTING CONTACT-MAKING | EN60061-3 | IEC60061-3 | 7006-52-1 |
| G01.44 | GAUGE FOR FINISHED LAMPS FITTED WITH E40 CAPS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT | EN60061-3 | IEC60061-3 | 7006-53-1 |
| G01.45 | "GO" GAUGES FOR SCREW THREADS OF LAMPHOLDERS E10, E14 & E40 | EN60061-3 | IEC60061-3 | 7006-25-7 |
| G01.46 | "NOT GO" GAUGES FOR SCREW THREADS OF LAMPHOLDERS E10, EP10, EY10, E14, E27, E39 & E40 | EN60061-3 | IEC60061-3 | 7006-26-4 |
| G01.47 | PLUG GAUGE FOR LAMPHOLDERS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT E40 | EN60061-3 | IEC60061-3 | 7006-24-3 |
| G01.48 | GAUGE FOR TESTING PROTECTION AGAINST BULB-NECK DAMAGE AND FOR TESTING CONTACT-MAKING IN LAMPHOLDERS E40 | EN60061-3 | IEC60061-3 | 7006-23-3 |
| G01.49 | "GO" GAUGE FOR CAPS ON FINISHED LAMPS E39 | EN60061-3 | IEC60061-3 | 7006-24B-1 |
| G01.50 | "NOT GO" GAUGE FOR CAPS ON FINISHED LAMPS E39 | EN60061-3 | IEC60061-3 | 7006-24C-1 |
| G01.51 | GAUGE FOR FINISHED LAMPS FITTED WITH E39 CAPS FOR TESTING CONTACT-MAKING | EN60061-3 | IEC60061-3 | 7006-24A-1 |
| G01.52 | "GO" GAUGE FOR SCREW THREAD OF LAMPHOLDERS E39 | EN60061-3 | IEC60061-3 | 7006-24E-1 |
| G01.53 | "NOT GO" GAUGES FOR SCREW THREADS OF LAMPHOLDERS E10, EP10, EY10, E14, E27, E39 & E40 | EN60061-3 | IEC60061-3 | 7006-26-4 |
| G01.54 | GAUGE FOR TESTING PROTECTION AGAINST BULB-NECK DAMAGE AND FOR TESTING CONTACT-MAKING IN LAMPHOLDERS E39 | EN60061-3 | IEC60061-3 | 7006-24D-1 |
| G01.55 | GAUGE FOR TESTING MAXIMUM INSERTION TORQUE IN LAMPHOLDERS WITH SHELL-GRIP FEATURES E39. | EN60061-3 | IEC60061-3 | 7006-24F-1 |
| G01.56 | GAUGE FOR TESTING MINIMUM TORQUE IN LAMPHOLDERS WITH SHELL-GRIP FEATURES E39 | EN60061-3 | IEC60061-3 | 7006-24G-1 |
| G01.57 | "GO" AND "NOT GO" GAUGE FOR BI-PIN CAP ON FINISHED LAMPS G23 | EN60061-3 | IEC60061-3 | 7006-69-2 |
| G01.58 | "GO" AND "NOT GO" GAUGE FOR BI-PIN CAP ON FINISHED LAMPS GX23 | EN60061-3 | IEC60061-3 | 7006-86-1 |
| G01.59 | "GO" AND "NOT GO" GAUGE FOR CAPS ON FINISHED LAMPS 2G7 & 2GX7 | EN60061-3 | IEC60061-3 | 7006-102-1 |
| G01.60 | "GO" GAUGE FOR CAPS ON FINISHED LAMPS 2G11 | EN60061-3 | IEC60061-3 | 7006-82-1 |
| G01.61 | "NOT GO" GAUGES "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS G24, GX24 & GY24. | EN60061-3 | IEC60061-3 | 7006-78F-5 |
| G01.62 | "GO" GAUGE FOR CHECKING THE PINS OF CAPS ON FINISHED LAMPS GR8 & GR10Q | EN60061-3 | IEC60061-3 | 7006-68E-1 |
| G01.63 | "GO" AND "NOT GO" GAUGE FOR CHECKING THE PINS OF CAPS (NOT FOR USE ON FINISHED LAMPS)GR8 & GR10Q | EN60061-3 | IEC60061-3 | 7006-68F-1 |
| G01.64 | GAUGE FOR CAPS TO ENSURE ENTRY OF MAXIMUM LAMPHOLDERS AND TO CHECK PIN-SPACING AND LENGTH GR8 | EN60061-3 | IEC60061-3 | 7006-68A-2 |
| G01.65 | ?GO? GAUGES FOR CAPS 2G13 | EN60061-3 | IEC60061-3 | 7006-33-2 |
| G01.66 | "GO" GAUGE FOR CAPS G10Q, GX10Q, GY10Q & GZ10Q | EN60061-3 | IEC60061-3 | 7006-79-2 |
| G01.67 | GAUGE FOR CAPS TO ENSURE ENTRY OF MAXIMUM LAMPHOLDERS AND TO CHECK PIN-SPACING AND LENGTH GR10Q | EN60061-3 | IEC60061-3 | 7006-77A-2 |
| G01.68 | "GO" GAUGE FOR CAPS ON FINISHED LAMPS GX10Q | EN60061-3 | IEC60061-3 | 7006-84-2 |
| G01.69 | "NOT GO" GAUGE "A" FOR CAPS ON FINISHED LAMPS GX10Q | EN60061-3 | IEC60061-3 | 7006-84A-1 |
| G01.70 | "NOT GO" GAUGE "B" FOR CAPS ON FINISHED LAMPS GX 10Q | EN60061-3 | IEC60061-3 | 7006-84B-1 |
| G01.71 | "GO" GAUGE FOR CAPS ON FINISHED LAMPSGY10Q | EN60061-3 | IEC60061-3 | 7006-85-2 |
| G01.72 | "NOT GO" GAUGE "A" FOR CAPS ON FINISHED LAMPS GY10Q | EN60061-3 | IEC60061-3 | 7006-85A-1 |
| G01.73 | "GO" GAUGES FOR THE KEYS OF CAPS ON FINISHED LAMPS GY10Q | EN60061-3 | IEC60061-3 | 7006-85D-1 |
| G01.74 | "NOT GO" GAUGES FOR CAPS ON FINISHED LAMPS GY10Q | EN60061-3 | IEC60061-3 | 7006-85E-1 |
| G01.75 | "GO" AND "NOT GO" GAUGES FOR BI-PIN LAMP BASES G4 | EN60061-3 | IEC60061-3 | 7006-72-1 |
| G01.76 | "GO"AND "NOT GO" GAUGE FOR UNMOUNTED BI-PIN CAP (NOT FOR USE ON FINISHED LAMPS) G5 | EN60061-3 | IEC60061-3 | 7006-46-3 |
| G01.77 | "GO" GAUGE FOR BI-PIN CAP ON FINISHED LAMPS G5 | EN60061-3 | IEC60061-3 | 7006-46A-3 |
| G01.78 | "GO" AND "NOT GO" GAUGE FOR UNMOUNTED BI-PIN CAP (NOT FOR USE ON FINISHED LAMPS) G13 | EN60061-3 | IEC60061-3 | 7006-44-4 |
| G01.79 | "GO" GAUGE FOR BI-PIN CAP ON FINISHED LAMPS G13 | EN60061-3 | IEC60061-3 | 7006-45-4 |
| G01.80 | DOUBLE-ENDED GAUGES FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACTMAKING G5 | EN60061-3 | IEC60061-3 | 7006-47B-3 |
| G01.81 | DOUBLE-ENDED "GO" GAUGES FOR A COMBINED PAIR OF LAMPHOLDERS G5 | EN60061-3 | IEC60061-3 | 7006-47C-3 |
| G01.82 | DOUBLE-ENDED GAUGES FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING G13 | EN60061-3 | IEC60061-3 | 7006-60B-4 |
| G01.83 | DOUBLE-ENDED "GO" GAUGES FOR A COMBINED PAIR OF LAMPHOLDERS G13 | EN60061-3 | IEC60061-3 | 7006-60C-3 |
| G01.84 | "GO" GAUGES FOR BASES G6.35, GX6.35 & GY6.35 | EN60061-3 | IEC60061-3 | 7006-61A-3 |
| G01.85 | GAUGE "A" FOR LAMPHOLDERS S14D | EN60061-3 | IEC60061-3 | 7006-112D-1 |
| G01.86 | GAUGES "B1" AND "B2" FOR LAMPHOLDERS S14D | EN60061-3 | IEC60061-3 | 7006-112E-1 |
| G01.87 | GAUGE "A" FOR LAMPHOLDERS S14S. | EN60061-3 | IEC60061-3 | 7006-112A-1 |
| G01.88 | GAUGE "B" FOR LAMPHOLDERS S14S | EN60061-3 | IEC60061-3 | 7006-112B-1 |
| G01.89 | GAUGE "C" FOR LAMPHOLDERS S14S | EN60061-3 | IEC60061-3 | 7006-112C-1 |
| G01.90 | "GO" GAUGE FOR BASE G9 | EN60061-3 | IEC60061-3 | 7006-129-1 |
| G01.91 | "GO" AND "NOT GO" GAUGE FOR BASES GU10 | EN60061-3 | IEC60061-3 | 7006-121-1 |
| G01.92 | SINGLE-PIN GAUGE "E" FOR CHECKING MINIMUM RETENTION FORCE OF CONTACTS IN LAMPHOLDERS 2G(X)7, 2G10, 2G11, G(X)23, G(X)(Y)24, G(X)(Y)32 | EN60061-3 | IEC60061-3 | 7006-69E-3 |
| G01.93 | "NOT GO" GAUGES "F" FOR CHECKING NON-INTERCHANGEABILITYOF CAPS IN LAMPHOLDERS G24, GX24 & GY24 | EN60061-3 | IEC60061-3 | 7006-78F-5 |
| G01.94 | "GO" GAUGE FOR R17D LAMPHOLDERS | EN60061-3 | IEC60061-3 | 7006-57A-1 |
| G01.95 | CONTACT-MAKING GAUGE FOR LAMPHOLDER R17D | EN60061-3 | IEC60061-3 | 7006-57B-1 |
| G01.96 | GAUGES FOR TESTING INSERTION AND CONTACT-MAKING IN LAMPHOLDERS 2G13 | EN60061-3 | IEC60061-3 | 7006-33A-2 |
| G01.97 | GAUGES FOR TESTING THE INSERTION OF CAPS IN LAMPHOLDERS B15D, B22D & BY22D | EN60061-3 | IEC60061-3 | 7006-4A-2 |
| G01.98 | GAUGES FOR TESTING THE RETENTION OF B15D AND B22D CAPS IN THE HOLDER | EN60061-3 | IEC60061-3 | 7006-4B-1 |
| G01.99 | "NOT GO" GAUGES FOR CAPS ON FINISHED LAMPS BA9, B15, B22 & BY22D | EN60061-3 | IEC60061-3 | 7006/10/8 |
| G01.100 | "GO" GAUGES FOR CAPS ON FINISHED LAMPS BA9, B15, BA15 & B22. | EN60061-3 | IEC60061-3 | 7006/11/8 |
| G01.101 | ACCEPTANCE GAUGE FOR B22D CAPS INTENDED FOR AUTOMATIC WIRE THREADING | EN60061-3 | IEC60061-3 | 7006/3/1 |
| G01.102 | "NOT GO"/RETENTION GAUGE FOR LAMPHOLDERS B15 | EN60061-3 | IEC60061-3 | 7006-12D-2 |
| G01.103 | SUPPLEMENTARY "GO" GAUGE FOR LAMPHOLDERS B15D | EN60061-3 | IEC60061-3 | 7006-12C-2 |
| G01.104 | GAUGES FOR SLOTS IN LAMPHOLDERS B15D, B22D, B22D-3 & BY22D | EN60061-3 | IEC60061-3 | 7006-13-5 |
| G01.105 | GAUGE FOR CHECKING CONTACT POSITION AND CONTACT FORCE IN BAYONET LAMPHOLDERS B15D | EN60061-3 | IEC60061-3 | 7006-15B-1 |
| G01.106 | GAUGES FOR TESTING THE INSERTION OF CAPS IN LAMPHOLDERS B15D, B22D & BY22D | EN60061-3 | IEC60061-3 | 7006-4A-2 |
| G01.107 | GAUGES FOR TESTING THE RETENTION OF B15D AND B22D CAPS IN THE HOLDER | EN60061-3 | IEC60061-3 | 7006-4B-1 |
| G01.108 | GAUGES FOR TESTING THE RETENTION OF B15D AND B22D CAPS IN THE HOLDER | EN60061-3 | IEC60061-3 | 7006/10/8 |
| G01.109 | "GO" GAUGES FOR CAPS ON FINISHED LAMPS BA9, B15, BA15 & B22 | EN60061-3 | IEC60061-3 | 7006/11/8 |
| G01.110 | PLUG GAUGES FOR LAMPHOLDERS BA21, B15 & B22 | EN60061-3 | IEC60061-3 | 7006/12/8 |
| G01.111 | GAUGE FOR CHECKING CONTACT POSITION AND CONTACT FORCE IN BAYONET LAMPHOLDERS B22D-3 (90°/135°) | EN60061-3 | IEC60061-3 | 7006-15-7 |
| G01.112 | PLUG GAUGE FOR BAYONET LAMPHOLDER B22D-3 (90°/135°) | EN60061-3 | IEC60061-3 | 7006-20-4 |
| G01.113 | SUPPLEMENTARY "GO" GAUGES FOR LAMPHOLDERS B22D & BY22D . | EN60061-3 | IEC60061-3 | 7006-12A-2 |
| G01.114 | "NOT GO"/RETENTION GAUGE FOR LAMPHOLDERS B22 | EN60061-3 | IEC60061-3 | 7006-12B-2 |
| G01.115 | GAUGES FOR CHECKING CONTACT POSITION AND CONTACT FORCE IN BAYONET LAMPHOLDERS B22D & BY22D | EN60061-3 | IEC60061-3 | 7006-15A-2 |
| G01.116 | GAUGES FOR SLOTS IN LAMPHOLDERS B15D, B22D, B22D-3 & BY22D | EN60061-3 | IEC60061-3 | 7006-13-5 |
| G01.117 | PLUG GAUGE FOR LAMPHOLDERS BY22D | EN60061-3 | IEC60061-3 | 7006-17B-1 |
G01.01
“GO”GAUGE FOR E14 CAPS ON FINISHED LAMPS
EN60061-3
IEC60061-3
7006-27F-1
G01.02
“NOT GO” GAUGE FOR E14 CAPS ON FINISHED LAMPS
EN60061-3
IEC60061-3
7006-28B-1
G01.03
GAUGE FOR FINISHED LAMPS FITTED WITH E14 CAPS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT
EN60061-3
IEC60061-3
7006-55-2
G01.04
GAUGE FOR FINISHED LAMPS FITTED WITH E14 CAPS FOR TESTING CONTACT-MAKING
EN60061-3
IEC60061-3
7006-54-2
G01.05
“GO”GAUGE FOR DIMENSION”S1” OF E14 CAPS ON FINISHED LAMPS
EN60061-3
IEC60061-3
7006-27G-1
G01.06
“GO”GAUGES FOR SCREW THREADS OF LAMPHOLDERS E10,E14&E40
EN60061-3
IEC60061-3
7006-25-7
G01.07
“NOT GO”GAUGE FOR SCREW THREADS OF LAMPHOLDERS E10,EP10,EY10,E14,E27,E39&E40
EN60061-3
IEC60061-3
7006-26-4
G01.08
PLUG GAUGE FOR E14 LAMPHOLDER FOR TESTING CONTACT-MARKING
EN60061-3
IEC60061-
Contact: Eason Wang
Phone: +86-755-13751010017
E-mail: info@iec-equipment.com
Add: 1F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China
Nina She